1. Enter Your Serial Number:
   In the field labeled "Enter your Serial Number," input your 8-digit serial number. Ensure it is formatted correctly (e.g., 40786000). You can find your serial number on the registration card or endorsement access card. Alternatively, you can locate the serial number by removing the right earpad, where it is written on a sticker on the earpad holder.
2. Enter Your Email:
   In the "Enter your Email" field, enter a valid email address.
3. Submit the Form:
   Once the processing is complete, you will receive:
   • A link to download the XPS calibration file.
   • Your USC II Redeem code.
4. Visit the Dsoniq Redeem Page:
   Go to Dsoniq Redeem Page.
5. Redeem Your Code:
   Enter your USC II Redeem code in the designated field to create an account with Dsoniq. Login instructions will be sent to your email.
6. Download the Plugin:
   You can download the plugin directly from the Dsoniq page.

In the field labeled "Enter Your Serial Number," input your 8-digit serial number (e.g., 40786000). Make sure it is entered correctly. You can find your serial number on either the calibration certificate or the certificate of authenticity, depending on your model version. Alternatively, you can locate the serial number by removing the right earpad, where it is printed on a sticker on the earpad holder.

After Processing is Complete, You Will Receive:

• A link to download the XPS calibration file.
• A link to download USC 1.0.

Steps for Installation:

1. Get the plugin by downloading the zip file and then unzip it. Choose the installer that fits your needs and system setup.
2. If you're upgrading, contact us directly at support@olloaudio.com.
3. Insert the plugin to your master or dedicated headphones out, then install the USC file to one of 8 available slots in the USC plugin by clicking on the slot and browsing for the file in your folder system.
4. XPS file can be integrated with Waves Nx plugins and Realphones if you wish to have more monitoring options with fully calibrated headphones.